Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

The contractor shall provide a fully functional existing Automatic Fire Detection System, and a

fully functional existing Manual Fire Alarm System, utilizing all existing operational government

furnished equipment, and materials and components that are found to not be operational but are

necessary for the completion of the project shall be provided by the contractor. The Contractor

shall inspect, troubleshoot, execute any required maintenance and repairs, necessary to get the

systems back up and running with all faults cleared and finally test and certify the systems as

operational.

A government furnished Fire Alarm Control panel, Harrington HS-3200, shall be installed by the

contractor replacing the existing Harrington HS-3400. The contractor shall be qualified on the

instillation and testing of all system components, including a Monaco Transceiver and Harrington

Control Panel HS-3200. Damage to the facility or additional maintenance and repairs required to put

the existing systems back into service, on other than the Fire Systems, shall be the responsibility

of the contractor to repair and make whole. This includes but is not limited to, the existing drop

ceiling and drywall and other interior finishes.

All existing and / or removed strobes, pull stations, detectors, circuit wiring, control panel,

transceiver, breakers, and all other components required to make the existing systems function,

shall be reinstalled, repaired, function checked, tested, and certified as operational by the

contractor. (Table 1) below shows what was existing in each of the 17 rooms of the facility that

shall be reinstalled and certified by the contractor as operational, see (Figure 1) for the

corresponding existing floor plan. Additionally, a fire system CAD as-build shall be provided to

the government after project completion and saved as an .dwg. This file shall encompass both the

Automatic Fire Detection System circuit and a Manual Fire Alarm System circuit and the locations of

all components. The existing CAD as-builds may be provided by the government upon request.